The C921-4P Cisco 900 Series Integrated Services Router is designed to protect networks from Internet vulnerabilities and attacks. It delivers integrated security and threat defense, and simplifies deployment of Ethernet WAN services. Plus, it comes with a 4-port managed switch, ideal for connecting multiple devices.
C921-4P Details
| SKU | C921-4P |
| WAN interfaces | 2 ports Gigabit Ethernet (GE) |
| LAN interfaces | 4-port GE managed switch |
| Integrated USB 2.0 | Yes |
| Default and maximum DRAM | Default 1 GB |
| Default and maximum flash memory | 2 GB; not upgradable |
| Dimensions (H x W x D) | 1.70 x 9.0 x 9.5 in. (4.32 x 22.86 x 24.13 cm) (includes rubber feet) |
C921-4P DATASHEET
| WAN interfaces | 2 ports Gigabit Ethernet (GE) |
| LAN interfaces | 4-port GE managed switch |
| Integrated USB 2.0 | Yes |
| Maximum crypto throughput (bit-rate policed) | 150 Mbps |
| Cisco IOS Software | |
| IP and IP services | ● Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2)
● Generic Routing Encapsulation (GRE) and Multipoint GRE (MGRE) ● Cisco Express Forwarding ● Standard 802.1d Spanning Tree Protocol ● Layer 2 Tunneling Protocol (L2TP) ● L2TP Version 3 (L2TPv3) ● Network Address Translation (NAT) ● Dynamic Host Configuration Protocol (DHCP) server, relay, and client ● Dynamic DNS ● DNS Proxy ● DNS Spoofing ● Access Control Lists (ACLs) ● IPv4 and IPv6 multicast ● Open Shortest Path First (OSPF) ● Border Gateway Protocol (BGP) ● Performance Routing (PfR) ● Enhanced Interior Gateway Routing Protocol (EIGRP) ● Virtual Route Forwarding (VRF) Lite ● Next Hop Resolution Protocol (NHRP) ● Bidirectional Forwarding Detection (BFD) ● Web Cache Communication Protocol (WCCP) |
| xDSL | ● True Multimode VDSL2 and ADSL2+ over Annex A, B, J, and M, including traditional G.DMT and T1.413
● World-class interoperability with industry-standard DSL Access Multiplexer (DSLAM) chipsets ● Highest field reliability with Impulse Noise Protection (INP) over Repetitive Electrical Impulse Noise (REIN) and single isolated impulse noise (SHINE), extended INP delay, G.INP, physical layer retransmission, Seamless Rate Adaptation (SRA), and Bitswap ● VDSL2 Persistent Storage Device (PSD) profiles up to 17a/b with support for spectral shaping ● VDSL2 vectoring to offer blazing fiber speeds over copper ● Remote management with TR069 and CWMP ● Investment protection with Gigabit Ethernet |
| Switch features | ● Auto Media Device In/Media Device Cross Over (MDI-MDX)
● 25 802.1Q VLANs ● MAC filtering ● Switched Port Analyzer (SPAN) ● Storm control ● Smart ports ● Secure MAC address ● Internet Group Management Protocol Version 3 (IGMPv3) snooping ● 802.1X |
| Security features | Secure connectivity:
● Secure Sockets Layer (SSL) VPN for secure remote access ● Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256 ● Public-Key-Infrastructure (PKI) support ● 50 IPsec tunnels ● Cisco Easy VPN client and server ● NAT transparency ● Dynamic Multipoint VPN (DMVPN) ● Tunnel-less Group Encrypted Transport VPN (GET VPN) ● VRF-aware IPsec ● IPsec over IPv6 ● Adaptive control technology ● Session Initiation Protocol (SIP) application-layer gateway ● Cisco IOS Firewall: ◦ Zone-based policy firewall ◦ VRF-aware stateful inspection routing firewall ◦ Stateful inspection transparent firewall ● Advanced application inspection and control ● HTTPS, FTP, and Telnet Authentication Proxy ● Dynamic and static port security ● Firewall stateful failover ● VRF-aware firewall ● Cisco IOS Software black and white lists ● Integrated threat control: ◦ Intrusion Prevention System (IPS) ● Control plane policing ● Flexible packet matching ● Network foundation protection |
| Quality of Service (QoS) | ● Low-Latency Queuing (LLQ)
● Weighted Fair Queuing (WFQ) ● Class-Based WFQ (CBWFQ) ● Class-Based Traffic Shaping (CBTS) ● Class-Based Traffic Policing (CBTP) ● Policy-Based Routing (PBR) ● Class-Based QoS MIB ● Class of Service (CoS)-to-Differentiated Services Code Point (DSCP) mapping ● Class-Based Weighted Random Early Detection (CBWRED) ● Network-Based Application Recognition (NBAR) ● Link Fragmentation and Interleaving (LFI) ● Resource Reservation Protocol (RSVP) ● Real-Time Transport Protocol (RTP) header compression (cRTP) ● Differentiated Services (DiffServ) ● QoS preclassify and prefragmentation ● Hierarchical QoS (HQoS) |
| Management | ● Cisco Configuration Professional
● Cisco Configuration Express ● Cisco Configuration Engine support ● Cisco AutoInstall ● Cisco IP Service-Level Agreement (IP SLA) ● Cisco IOS Embedded Event Manager (EEM) ● CiscoWorks ● Cisco Security Manager ● Telnet, Simple Network Management Protocol Version 3 (SNMPv3), Secure Shell (SSH) Protocol, Command-Line Interface (CLI), and HTTP management ● RADIUS and TACACS+ ● Cisco Next Generation Plug-and-Play (NG PnP) Protocol |
| High availability | ● Virtual Router Redundancy Protocol (VRRP) (RFC 2338)
● HSRP ● MHSRP |
| Metro Ethernet | ● Ethernet OA&M
● Ethernet Local Management Interface (E-LMI) ● IP SLA for Ethernet |
| IPv6 | ● IPv6 addressing architecture
● IPv6 name resolution ● IPv6 statistics ● IPv6 translation: Transport packets between IPv6-only and IPv4-only endpoints (NAT-Protocol Translation) ● Internet Control Message Protocol Version 6 (ICMPv6) ● IPv6 DHCP ● OSPFv3 ● BGP4+ ● IPv6 Path Maximum Transmission Unit (PMTU) ● IPv6 neighbor discovery ● IPv6 stateless address autoconfiguration (SLAAC) ● IPv6 multicast routing |
| Application visibility and control | ● NBAR2
● Flexible NetFlow (FNF) ● Performance Agent |
| Number of recommended users | ● 50 |
| Default and maximum DRAM | ● Default 1 GB |
| Default and maximum flash memory | ● 2 GB on all Cisco 900 Series ISR models; not upgradable |
| WAN | ● Refer to Table 2 for details |
| LAN switch | ● Refer to Table 2 for details |
| Separate console ports | ● RJ-45 |
| USB 2.0 | ● One USB 2.0 Type A port |
| Physical dimensions | H x W x D = 1.70 x 9.0 x 9.5 in. (4.32 x 22.86 x 24.13 cm) (includes rubber feet) |
| Power supply | Power specifications:
● AC input voltage: Universal 100 to 240 VAC ● Frequency: 50 to 60 Hz ● Internal power supply (C921-4P and C931-4P only) |
| Approvals and compliance | Safety:
● IEC 60950-1 ● UL 60950-1 ● CAN/CSA C22.2 No. 60950-1 ● EN 60950-1 ● AS/NZS 60950.1 ● Class I Equipment (C921-4P and C931-4P only) ● Class III Equipment (C927-4P, C927-4PM, and C926-4P only) Emissions: ● 47 CFR Part 15: 2006 ◦ CISPR22: Edition 6.0: 2008 ◦ CNS13438: 2006 ◦ EN 300 386 V1.6.1 ◦ EN 55032 ◦ EN61000-3-2: 2006 [+ amd 1 & 2] ◦ EN61000-3-3: 2008 ◦ ICES-003 Issue 5: 2012 ◦ KN 22: 2009 ● TCVN 7189: 2009 ● VCCI: V-3/2012.04 Immunity: ● CISPR24: 2010 [+ amd 1 & 2] ◦ EN300386: V1.6.1 ◦ EN55024: 2010 ◦ EN61000-6-1: 2007 ◦ KN24: 2011 ◦ TCVN 7317:2003 |
| Environmental operating range | ● Nonoperating temperature: -40° to 158°F (-40° to 70°C)
● Nonoperating humidity: 5% to 95% relative humidity (noncondensing) ● Nonoperating altitude: 0 to 15,000 ft (0 to 4570 m) ● Operating temperature: 0° to 50°C (de-rate 1°C per 1000-ft increase in altitude) ● Operating humidity: 5% to 95% relative humidity (noncondensing) ● Operating altitude: 0 to 10,000 ft (0 to 3000 m) |
The optional accessories.
| Model | Description |
| CAB-C13-ACB | AC Power Cord (Brazil), C13, NBR 14136, 2.1M |
| CAB-ACE= | AC Power Cord (Europe), C13, CEE 7, 1.5M |
| CAB-ACC | Power Cord – China |
| CAB-IND | AC Power Cord (India) |
| CAB-AC= | AC Power Cord (North America), C13, NEMA 5-15P, 2.1m |
| CAB-ACI= | AC Power Cord (Italy), C13, CEI 23-16, 2.5m |
| PWR-CORD-KOR-B | Power Cord for South Korea 2m 10A |
| CAB-JPN | AC Power Cord (Japan), C13, JIS C 8303, 2.5m |
| CAB-C13-C14-2M-JP | Power Cord C13-C14, 2M/6.5ft Japan PSE mark |
| CAB-ACTW | AC Power Cord (Taiwan), C13, EL 302, 2.3M |
| CAB-3P-JPN | AC Power Cord (Japan), C13, 3 Prong Plug, 2.3M |
| CAB-ACA | AC Power Cord (Australia), C13, AS 3112, 2.5m |
| PWR-CORD-ZAF-D | Power Cord South Africa |
| CAB-CONSOLE-RJ45 | Console Cable 6ft with RJ45 and DB9F |
| CAB-CONAUX | Straight serial cable – RJ45 to DB25 male |
| CAB-ETH-S-RJ45 | Yellow Cable for Ethernet, Straight-through, RJ-45, 6 feet |
Compare to Similar Item
| Model | WAN interfaces | LAN interfaces | Integrated USB 2.0 |
| C921-4P | 2 ports Gigabit Ethernet (GE) | 4-port GE managed switch | Yes |
| C931-4P | 2 ports GE | 4-port GE managed switch | Yes |
| C927-4P | 1 port GE and 1 VADSL (Annex A) | 4-port GE managed switch | Yes |
| C926-4P | 1 port GE and 1 VADSL (Annex B/J) | 4-port GE managed switch | Yes |
| C927-4PM | 1 port GE and 1 VADSL (Annex M) | 4-port GE managed switch | Yes |
Network Equipment Warranty Policy
All devices purchased from Datadirect Global are brand new, sealed, and covered by the brand’s official warranty. This ensures that you receive high-quality, reliable products with the backing of comprehensive warranty support.
Warranty Service
During the warranty period, should any quality issues arise, you have two options for service:
- Official Customer Service: Contact the brand’s official customer service directly to apply for local RMA warranty service.
- Datadirect Global: Send the equipment back to DatadirectGlobal for warranty service.
Brand-Specific Warranty Policies
| Cisco/Juniper/Meraki: | 1 year |
| HPE/Aruba: | Limited Lifetime Warranty |
| Coverage Duration: The warranty extends as long as the original end user owns the product, with a limit of five (5) years from the end of sale date (end of service life). Hardware Replacement: Software FOS Releases: On-Site Support: |
|
| DELL: | Three-year official warranty |
| Fortinet | 1 Year |
Contact Information
For any questions or assistance regarding warranty services, please contact Datadirect Global customer support.
Customer Support Email: info@network-devices.com
Customer Support Skype: +8613851467276
By purchasing from Datadirect Global, you are assured of receiving products with robust warranty support, ensuring peace of mind and reliable operation.
Reviews
There are no reviews yet.